ACM4CBE Altronix 4 Output Access Power Controller Module w/ Enclosure - PTC Output

Specifications

Input

• Voltage
  • 12 to 24 VAC or VDC operation (setting not required), 0.4A @ 12V, 0.2A @ 24V current consumption with all relays energized.
  • Main fuse is rated at 10A.
• Trigger Inputs - Four (4) Access Control System trigger inputs:
  • Four (4) normally open (NO) inputs.
  • Four (4) open collector sink inputs.
  • Any combination of the above.
• Input Options
  • One (1) common power input (board and lock power).
  • Two (2) isolated power inputs (one (1) for board power and one (1) for lock/accessory power).

Outputs

• Four (4) independently controlled Class 2 Rated
• PTC protected power-limited auto-resettable 2A outputs:
  • Four (4) Fail-Safe and/or Fail-Secure power outputs.
• Four (4) auxiliary power outputs (unswitched).
• Output ratings - Output PTCs are rated 2A each.
• Note - Total output current is determined by the power supply, not to exceed a maximum of 10A total.

Indicators (LED)

• Red LEDs - Outputs are triggered (relays energized).
• Green LED - FACP disconnect is triggered.

Agency Listings

• UL
  • Access Control - UL294
• cUL
  • General Signaling Equipment Evaluated to CSA Standard C22.2 No.205-M1983.

Physical and Environmental

• Enclosure Dimensions (H x W x D) - 8.5" x 7.5" x 3.5" (215.9mm x 190.5mm x 88.9mm).
• Product Weight - 3.4 lbs. (1.55 kg).
• Shipping Weight - 3.9 lbs. (1.77 kg).
• Temperature
  • Operating - 0°C to 49°C (32°F to 120°F).
  • Storage - -20°C to 70° C (-4°F to 158°F).
• Relative Humidity - 85% +/-5%.
• BTU/Hr (approx.)
  • 12VAC or VDC - 2 BTU/Hr.
  • 24VAC or VDC - 3 BTU/Hr.

ACM4CBE Specifications Sheet

ACM4CBE Installation Manual