AL125ULX Altronix 2 Output Power Supply/Charger w/ Fire Alarm Disconnect and Enclosure 12VDC or 24VDC @ 1 Amp

Altronix AL125ULX Series power-limited Power Supply/Chargers convert 115VAC 50/60Hz input into two individually PTC protected 12VDC or 24VDC outputs (see specifications). They are intended for use in applications requiring UL Listing for Access Control (UL294) and applications requiring an interface with Fire Alarm Control Panels.

Specifications

Input

• Voltage - 115VAC, 50/60Hz, 0.6A

Output

• Voltage - 12VDC or 24VDC selectable.
• Current - 1A power-limited continuous max.
• Protection - PTC.
• Other - Filtered and regulated.

Back-up Battery

• Type - Sealed lead acid or gel type.
• Capacity - Varies, See Reference Chart.
• Failover - Upon AC loss, instantaneous.

Indicators (LED)

• Unit Status - Normal / No Output / Loss of AC / Triggered.

Agency Listings

• Access Control - UL294 CSA Standard C22.2 No.205-M1983, Signal Equipment.
• NYC Department of Buildings Approved

Physical and Environmental

• Dimensions (H x W x D) and Description - 13.5" x 13" x 3.25" (342.9mm x 330.2mm x 82.55mm).
• Product Weight / Shipping (approx.)
  • Product Weight - 9.5 lbs. (4.31 kg)
  • Shipping Weight - 10.4 lbs. (4.72 kg)
• Temperature
  • Operating - 0™C to 49™C (32™F to 120™F).
  • Storage - -20™C to 70™C (-4™F to 158™F).
• Relative Humidity - 85% +/-5%.
• BTU/Hr. (approx.)
  • 12VDC - 6 BTU/Hr.
  • 24VDC - 6 or 12 BTU/Hr.

AL125ULX Spec Sheet

AL125ULX Installation Manual