9000006 Potter IFS-WP-2 Industrial Flow Switch

Features

• Listings/Approvals:
• UL Guide (NKPZ) for industrial control equipment per UL Standard 508 Industrial Control Equipment
• UL Guide (MFHX) for heating/cooling appliance switch per UL Standard 353 Limit Controls
• CSA Class (321106) for industrial control equipment per CSA Standard C22.2 No. 14-M Industrial Control Equipment
• CE Marked

General

The Model IFS-WP is a flow switch used in liquid flow lines carrying water or any fluid not harmful to brass, stainless steel, or EPDM and not classified as a hazardous fluid.

This switch can serve as a way to start and stop electrically operated equipment when a flow or no flow condition occurs in a variety of applications.

This device is designed for use only as an operating control. Where an operating control failure would result in personal injury and/or loss of property, it is the responsibility of the installer to add devices (safety, limit controls) that protect against, or systems (alarm, supervisory systems) that warn of control failure.

Technical Specifications

• Maximum Service Pressure: - 250 PSI
• Enclosure: - Die-cast grey powdercoat finish on cover. Plated steel base. Not for use in hazardous locations
• Contacts:
  • IFS-WP1 / IFSS-WP1: - One SPDT (Form C) switch
  • IFS-WP2 / IFSS-WP2: - Two sets of SPDT (Form C) switches to provide versatility in wiring two separate circuits.
  • 15 Amps at 125/250VAC
  • .5 Amps at 125VDC
  • .25 Amps at 250VDC
• Motor Ratings - 120VAC 240VAC
• Horsepower - 1/8 1/4
• AC F.L.A. - 3.8 2.9
• AC L.R.A. - 22.8 17.4
• Pilot Duty Rating : - 125VA 120/240VAC
• Environmental Specifications: - Suitable for indoor or outdoor use with factory installed gasket and die-cast housing. NEMA 4 Rated Enclosure - use with appropriate conduit fitting
• Ambient Temperature Range: - 32°F to 176°F (0°C to 80°C)
• Media Temperature Range: - 32°F to 250°F (0°C to 121°C)
• IFS-WP1 / IFS-WP2 Pipe Connection: - 1 in. NPT Brass
• IFSS-WP1 / IFSS-WP2 Pipe Connection: - 1 in. NPT 316 Stainless Steel
• Conduit Entrance: - One opening for 1/2" conduit
• Usage: - For pipe sizes 1" - 8"
• Caution: - This device is not intended for applications in explosive environments

9000006 Specifications PDF