ILC PulseWorx In-Line Choke Filter, 1.8 A

The In-Line Choke (ILC) is a small wire-in electronic device designed to keep electrical noise generated by certain electronic ballasts and other electrical devices from reaching the powerline.
In very few instances multiple devices will create noise that may interfere with any UPB based products' ability to communicate properly with one another. The ILC is installed at the offending device in series with the load to choke out or stop the interfence. Maximum load is rated at 1.8 Amps at 120VAC.

Specifications

ELECTRICAL

• Power Requirements - 120VAC 50Hz/60Hz
• Connections/Power Wire
  • Two 16 AWG gauge 105 C insulation
  • Black – both to Line
• Environmental Conditions
  • Indoor Use Only or water-proof enclosure
  • Temperature: -40° to 194°F (-40° to 90°C)
  • Humidity: 10% to 90% RH (non-condensing)

OPERATION

• Filtering - Stomps out noise
• Status LED Modes - None
• LED Indicators - None
• During Power outage - None
• Set-Up Mode - None required.

MECHANICAL

• Button Type - None
• Mounting - Wired
• Dimensions - Height: 1.5 in Width: 0.75 in Depth: 0.50 in
• Weight - 1 oz.
• Warranty - 5 years