DRL-48V120W1EN Vivotek LYTE II DIN Rail Power Supply

Specifications

Input Ratings / Characteristics

• Nominal Input Voltage - 100-240 Vac
• Input Voltage Range - 90-264 Vac
• Nominal Input Frequency - 50-60 Hz
• Input Frequency Range - 47-63 Hz
• Input Current - 2.1 A typ. @ 115 Vac, 1.3 A typ. @ 230 Vac
• Efficiency at 100% Load - 89.5% typ. @ 230 Vac
• Average Efficiency (25%, 50%, 75%, 100%) - 88% typ. @115 Vac
• No Load Power Consumption - 0.21 W max @ 115 Vac & 230 Vac
• Max Inrush Current (Cold Start) - 35 A typ. @ 230 Vac
• Leakage Current - < 0.5 mA @ 240 Vac

Output Ratings / Characteristics*2

• Nominal Output Voltage - 48 Vdc
• Factory Set Point Tolerance - 48 Vdc ™ 1%
• Output Voltage Adjustment Range - 43.2-52.8 Vdc
• Output Current - 2.5A
• Output Power - 120 W max
• Line Regulation - ™ 0.5% @ 115 Vac & 230 Vac
• Load Regulation - ™ 0.5%
• PARD*3 (20 MHz) - < 200 mVpp @ 0™C to +70™C, < 600 mVpp @ -30™C to 0™C
• Rise Time - 30 ms typ. @ 115 Vac & 230 Vac
• Start-up Time - 500 ms typ. @ 115 Vac & 230 Vac
• Hold-up Time - 10 ms typ. @ 115 Vac (100% load), 16 ms typ. @ 230 Vac (100% load)
• Dynamic Response (Overshoot & Undershoot O/P Voltage) - ™ 10% @ 115 Vac & 230 Vac input, 10-100% load (Slew Rate: 2.5 A/μs, 50% duty cycle @ 5 Hz & 10 kHz)
• Start-up with Capacitive Loads - 3,000 μF Max

Mechanical

• Case Cover / Chassis - SGCC / Aluminum
• Dimensions (H x W x D) - 123.6 x 30 x 116.8 mm (4.87 x 1.18 x 4.60 inch)
• Unit Weight - 0.45 kg (0.99 lb)
• Indicator - Green LED (DC OK)
• Cooling System - Convection
• Terminal* 4
  • Input - 3 Pins (Rated 300 V / 30 A)
  • Output - 4 Pins (Rated 300 V / 20 A)
• Wire
  • Input - AWG 18-12 (Current rating can refer to ™AWG Wire Table™)
  • Output - AWG 18-12 (Current rating can refer to ™AWG Wire Table™)
• Mounting Rail - Standard TS35 DIN Rail in accordance with EN 60715
• Noise (1 Meter from power supply) - Sound Pressure Level (SPL) < 25 dBA

Environment

• Surrounding Air Temperature
  • Operating - -30™C to +70™C (-40™C Cold Start)
  • Storage - -40™C to +85™C
• Power De-rating
  • Temperature - > 40™C de-rate power by 1.67 % / ™C @ 115 Vac, > 50™C de-rate power by 2.5 % / ™C @ 230 Vac
  • Input Voltage - < 100 Vac de-rate power by 1% / Vac
• Operating Humidity - 20 to 90% RH (Non-Condensing)
• Operating Altitude - 0 to 5,000 Meters (16,400 ft.)
• Shock Test
  • Non-Operating - IEC 60068-2-27, Half Sine Wave: 50 G for duration of 11 ms; 3 times per direction, 9 times in total
  • Operating - IEC 60068-2-27, Half Sine Wave: 10 G for duration of 11 ms; 1 time in X axis
• Vibration
  • Non-Operating - IEC 60068-2-6, Random: 5 Hz to 500 Hz (2.09 G); 20 min per axis for all X, Y, Z direction
  • Operating - IEC 60068-2-6, Sine Wave: 10 Hz to 500 Hz @ 19.6 m/s™ (2 G peak); 10 min per cycle, 60 min for X direction
• Over Voltage Category - II (Compliance to EN 62477-1 OVC III with 2000 meters altitude)
• Pollution Degree - 2

Protections

• Overvoltage - < 64.8 V, SELV Output, Latch Mode
• Overload / Overcurrent - 105 - 150% of rated load current, Auto-recovery Continuous current limit Mode* 5 (Vo > 80%)
• Over Temperature - Latch Mode
• Short Circuit - Hiccup Mode, Non-Latching (Auto-Recovery when the fault is removed)
• Protection Against Shock - Class I with PE*6 connection

Reliability Data

• MTBF - Telcordia SR-332 - > 700,000 hrs, I/P: 115 Vac & 230 Vac, O/P: 100% load, Ta: 25™C
• Expected Cap Life Time - 10 years (230 Vac, 50% load @ 40™C)

Safety Standards / Directives

• Electrical Safety
  • CB scheme - IEC 62368-1, IEC 60950-1, IEC 61010-1 & -2-201
  • TUV Bauart - EN 62368-1, EN 61010-1 & -2-201
  • UL/cUL - UL 62368-1
  • BSMI - CNS14336-1
  • EAC - TP TC 004/2011
  • KC - K 60950-1 (24 V model only)
• CE - In conformance with EMC Directive 2014/30/EU and Low Voltage Directive 2014/35/EU
• UKCA - In conformance with Electrical Equipment (Safety) Regulations 2016 and Electromagnetic Compatibility Regulations 2016
• Galvanic Isolation
  • Input to Output - 3.0 KVac
  • Input to Ground - 2.0 KVac
  • Output to Ground - 1.0 KVac

EMC

• Emissions (CE & RE) - CISPR 32, EN/BS EN 55032, EN/BS EN 61000-6-4, AS/NZS CISPR32, EN/BS EN 61204-3, KN 32 (24 V model only), Compliance to FCC Title 47, EN/BS EN 61000-6-3: Class B
• Component Power Supply for General Use - EN/BS EN 61204-3
• Immunity - EN/BS EN 55035, KN 35 (24 V model only), EN/BS EN 61000-6-2 Compliance to EN/BS EN 61000-6-1
• Electrostatic Discharge - IEC 61000-4-2 - Level 4 Criteria A1), Air Discharge: 15 kV, Contact Discharge: 8 kV
• Radiated Field IEC 61000-4-3 - Criteria A1), 80 MHz ™ 1 GHz, 10 V/M, 80% Modulation (1 kHz), 1.4 GHz ™ 2 GHz, 3 V/M, 80% Modulation (1 kHz), 2 GHz ™ 2.7 GHz, 1 V/M, 80% Modulation (1 kHz)
• Electrical Fast Transient / Burst - IEC 61000-4-4 - Level 3 Criteria A1) 2 kV
• Surge IEC 61000-4-5 - Level 4 Criteria A1) Common Mode4) : 4 kV, Differential Mode5) : 2 kV
• Conducted IEC 61000-4-6 - Level 3 Criteria A1) 150 kHz ™ 80 MHz, 10 Vrms
• Power Frequency Magnetic Fields - IEC 61000-4-8 - Level 4 Criteria A1) 30 A/m
• Voltage Dips and Interruptions IEC 61000-4-11 - 0% residual; 1 cycle, Criteria B2), 40% residual; 10 cycle, Criteria C3), 70% residual; 25 cycle, Criteria C3)
• Harmonic Current Emission - IEC/EN/BS EN 61000-3-2, Class A
• Voltage Fluctuation and Flicker - IEC/EN/BS EN 61000-3-3
• Voltage Sag Immunity SEMI F47 ™ 0706 - Criteria A1), Criteria A1), Criteria A1)

DRL-48V120W1EN Specifications PDF