MVE-AH1H1-42YQ Seco-Larm 4K ENHANCED HDMI Long-Range Extender

The ENFORCER 4K ENHANCED HDMI Long-Range Extender extends the range of HDMI signals using an active transmitter and receiver to send video and audio, RS-232, and bi-directional IR over a single Cat5e/6 cable. It can send 1080p signals up to 492ft (150m) between the two units with zero signal loss and 4K2K/UHD HDMI signals up to 394ft (120m) using a single power supply on either end.

Specifications

• Input video signal - 3.3V
• Input DDC signal - 5Vp-p (TTL)
• Maximum single link range - 4K2K@60Hz
• Deep color - 48-bit
• Video formats supported - All HDMI 3D, HDCP 2.2
• Audio formats supported - LPCM 2.0/2.1/5.1/6.1/7.1, Dolby Digital, Dolby TrueHD, Dolby Digital Plus (DD+), DTS-ES, DTS HD Master, DTS HD-HRA, DTS-X
• L/R Audio formats - PCM 2.0
• Output video - HDMI
• Resolutions supported - 4K2K@50/60Hz, 4K2K@30Hz, 1080p, 1080i, 720p, 720i, 480p, 480i
• Range
  • 1080p - 492ft (150m)
  • 4K2K - 394ft (120m)
• Video amplifier bandwidth - 18Gbps
• Video input connector - HDMI Type A 19-pin female
• Max. HDMI cable length (IN/OUT) - 4K@60Hz, 16' (5m) / 4K@30Hz, 32' (10m) / 1080p@60Hz, 50' (15m)
• Cat5e/6 wiring standard - T568-B
• IR Pass-through - 20~60kHz
• Operating voltage - 24VDC
• Power supply - 1A@24VDC (1 adapter)
• ESD protection (human body model) - ±8kV (air-gap discharge), ±4kV (contact discharge)
• Current draw (both units total) - 390mA
• Operating humidity - 20~90% (non-condensing)
• Operating temperature - 32°~104° F (0°~40° C)
• Dimensions (transmitter and receiver) - 51/2"x11/16"x29/16" (140x18x65 mm)
• Weight
  • Transmitter - 5.6-oz (160g)
  • Receiver - 5.5-oz (155g)

MVE-AH1H1-42YQ Specifications PDF