ENFORCER-295 Seco-Larm Alarm Control Panel - Special Order

Specifications

5 Separate zone inputs

• N.O. or N.C. (selectable) instant zone with exit delay
• N.C. instant zone with exit delay
• N.C. delay zone with entry and exit delays
• N.O. 24-hour panic zone with no entry and exit delays
• N.C. 24-hour tamper zone instant trigger no delay

3 Adjustable timers

• Entry delay timer adjustable from 1 sec to 45 sec.
• Exit delay timer adjustable from 1 sec to 45 sec.
• Alarm duration timer adjustable from 3 sec to 20 min.

9 Status LEDs

• (LEDs #1-5) Individual zone status green LEDs
• Total zone status green LED. Indicates total zone status of the five zones
• Arm/disarm/shunt status red LED. Indicates if alarm is armed, disarmed, or if a zone has been shunted
• Entry/Exit status yellow LED. Indicates if alarm is in entry or exit delay mode
• Primary power status red LED. Indicates if AC power is on or off
• All 9 status LEDs visible when cabinet is closed

2 Alert signals for entry and exit delay

• Exit delay: A pulsed output during exit delay
• Entry delay: A constant output during entry delay
• Patented Automatic Extended Exit Delay (A.E.E.D.): Opening a switch/sensor connected to an exit delay zone before the exit delay elapses automatically extends the exit delay for as long as the switch/sensor remains open
• Fail-safe circuitry: Alarm cannot be armed unless all switches and sensors connected to unshunted zones are in their non-violated state
• Phase-II continual protection: To assure continuous protection, any input that remains triggered after the alarm duration has elapsed will shut down
• All other inputs will remain armed
• Multi-remote arm/disarm: Allows for the installation of up to 10 arming/disarming devices
• Arm/disarm report output: Sends 100mA transistor ground signal to indicate alarm is armed or disarmed
• Tamper output: Sends a 100mA transistor ground signal for as long as the tamper zone is activated
• Dry relay contact panic output (C. - N.O.): Relay contacts close when the panic zone is activated
• Positive voltage (3 Amp) relay alarm output: Powers signaling devices like a siren, bell, dialer, etc.
• Works on 16V AC/DC with back-up battery input
• Use with DC adapter or Class-II transformer ​
• Regulated power supply and recharger
• Heavy-duty, beige-colored steel cabinet: Measures 8 1/2"x3 1/8"x11 7/16" (215 x 79 x 290 mm)
• Detachable front cover of steel cabinet
• 2 tamper switches included: Detects if steel cabinet front cover opened or cabinet removed from wall