MVE-AH1E1-01NQ Seco-Larm HDMI Extender over Single Cat5e/6

The ENFORCER HDMI Extender over Single Cat5e/6 extends the range of traditional HDMI cabling methods by using an active transmitter and receiver to send video and audio over a single Cat5e/6 cable. HDMI formats as large as 1080p can be transmitted up to 164ft (50m) between the two units with zero signal loss by using integrated circuits in the receiver and transmitter. The extender also supports HDMI loop output, EDID management settings, and one way IR control for remotely controlling HDMI sources and displays.

Specifications

• Input Video signal - 3.3V
• Input DDC signal - 5Vp-p (TTL)
• Maximum single link range - 1080p
• Deep color - 24bit
• Video formats supported - High-speed HDMI, HDCP 1.2
• Audio formats supported - LPCM, Dolby-AC3, DTS7.1, DSD
• Output video - HDMI
• Resolutions supported - 1080p/1080i/720p/576p/576i/480p/480i
• Range – 1080p - Up to 164' (50m)
• Video amplifier bandwidth - 4.95Gbps
• Video input connector - HDMI Type A 19-pin female
• Maximum input cable length - 24AWG (15m), 26AWG (10m), 28AWG (5m)
• Video output connector - HDMI Type A 19-pin female
• Maximum output cable length - 24AWG (15m), 26AWG (10m), 28AWG (5m)
• Cat5e/6 Wiring standard - T-568B
• IR Pass-through frequency - 30~60 kHz
• Operating voltage - 5VDC
• Power supply - 1A@5VDC (2 Adapters) (2.1mm plug)
• ESD Protection (human body model) - ±8kV (Air-gap discharge), ±4kV (contact discharge)
• Current draw
  • Transmitter - 300mA@5VDC
  • Receiver - 200mA@5VDC
• Operating temperature - 32°~104° F (0°~40° C)
• Operating humidity - 20~90% RH (No condensation)
• Dimensions - 31/8"x11/16"x25/8" (79x17x67 mm)
• Weight - 5.3-oz (150g) (Each)

MVE-AH1E1-01NQ Specifications PDF