SK-917TP3J-RU Seco-Larm 3 Button RF CODEBUMP Transmitter

Be prepared for today's thieves with SECO-LARM's patented CODEBUMP™ technology. With CODEBUMP, so-called code-grabbers and scanners are rendered obsolete because the RF code changes every time the transmitter button is pressed. In addition, with over 18 quintillion (1.8x1019) codes, the chances of ever repeating a code are virtually non-existent. SECO-LARM's ENFORCER CODEBUMP transmitters and receivers are perfect for controlling garage and gate openers, car and home alarms, plus much more.

Specifications:

• Operating Frequency - 315MHz (433.92MHz also available by request - SK-910R4-4Q)
• Operating Voltage - 11~24V AC/DC
• Operating Distance - Up to 500' (150m)
• Operating Temperature - -4°~162° F (-20°~72° C)
• Current Drain - 45mA@12VDC per Channel activated
• Sensitivity - -87dBm (typical)
• Data Format - PWM
• Transmitter Compatibility - Fixed-Code Models ( SK-919TD1S-U, SK-919TD2A-U, SK-919T3J, SK-919T4J, SK-919T1H, SK-919T2H, SK-919T4H) CODEBUMP™ Models (SK-917T2A, SK-917T4J)
• RF Codes - 18 quintillion, for ENFORCER CODEBUMP remotes. 68 billion, for ENFORCER fixed-code remotes
• Coded Channels - Four
• Number of Stored Transmitter Codes - 15 per channel, 60 per receiver
• Receiver Outputs - Four Form C dry relay contacts (NO/NC/COM); rated 10A@24VDC
• Receiver Output Modes - Programmable independent outputs: timed momentary (1, 2, 3, 4, 5, 10, 30, 60 sec.), toggle (ON/OFF), latched, continuous
• Connectors - 8 Pin wire harness and Channel 3 wire
• Case Construction - High-impact ABS plastic
• Size - 43/8"x55/16"x11/8" (111x135x28 mm)
• Weight - 3.5-oz (100g)

SK-917TP3J-RU Specifications PDF

SK-917TP3J-RU Manual