NSW3000-24T1GT1GC-LPOE-IN Uniview Ethernet 24 Port 250W Cloud Managed Ethernet PoE Switch

The NSW3000 series Ethernet PoE switch is a cloud managed switch self-developed by Uniview with high performance, easy to use and maintain. The product adopts the leading high performance hardware architecture and industrial design concepts to enhance the environmental adaptability of the network. It provides a lightweight 2 layers of network basic configuration, including port mirroring, port anti-loop, VLAN, link aggregation, flow control, etc. It supports auto-discovery of connected video devices and generation of network topology; supports unified management and configuration on the software for rapid maintenance of multiple devices; and supports viewing the device status and managing devices on the Web or app. The switch meets the user's requirements to access the network with highly reliability and low cost, widely used in scenarios such as stores, supermarkets, enterprises, campuses, etc.

Specifications

Hardware

• Item - NSW3000-24T1GT1GC-POE-IN
• Service port - 24 x 10/100Mbps POE port (RJ45) + 1 x Gigabit port (RJ45) + 1 x Gigabit Combo
• Switching capacity - 8.8Gbps
• Packet forwarding rate - 6.55Mpps
• Packet buffer - 4Mbit
• MAC - 16K
• Weight - 2.9kg
• Power supply - AC 100V to 240V, 50/60Hz
• PoE standard - IEEE802.3af/at
• PoE power - Maximum total power: 370W, Maximum PoE power for single port: 30W
• PoE power supply mode - Mode A, 1/2+, 3/6-, Mode B, 4/5+, 7/8-
• Priority ports - 1 to 8
• Priority QoS - Forwards the packets from the first eight priority ports in the event of data congestion
• Fan - 1
• Dimensions (WxDxH) - 440mm x 244.8mm x 44mm
• Operating temperature - 0°C to 40°C
• Operating humidity - 10% to 90% RH, noncondensing
• Storage temperature - -40°C to 70°C
• Storage - 5% to 90% RH, noncondensing
• Humidity -

Indicator

• Power
  • Steady on - Normal power input
  • Off - Abnormal power input
• PoE
  • Off - The PoE port is not supplying power
  • Steady on - The PoE port is supplying power normally
• Link/Act
  • Off - Disconnected to the port
  • On - Connected to the port
  • Blinking - Transmitting data
• MAX
  • Off - The total PoE power is less than 80% of the total power of the device
  • Steady on - The total PoE power is higher than 85% of the total power of the device

Software

• Ethernet
  • Supports full duplex, half duplex, and auto-negotiation working modes
  • Supports port auto-negotiation rate
  • Supports port priority flow control
  • Supports a link aggregation group (consist of two uplink ports)
  • Supports port flow statistics
  • Supports enabling/disabling ports
• System
  • Allows to view the device name, device model, serial number, current version, IP address, MAC address, DNS, operation time, etc
  • Allows to edit and manage the IP address and device name
  • Supports single-user management, user authentication, and password modification
  • Supports manual time configuration and NTP
  • Allows to view other switches information on the same network, up to 32 switches
  • Allows to view the connected video devices information, up to 64 devices
• VLAN - Supports both access and trunk modes; allows up to 32 VLANs with IDs from 1 to 4095
• MAC - Support (up to 16K), Supports clearing the dynamic MAC address
• Port loopback detection - Support
• QoS - Supports port rate limitation, Supports broadcast storm control
• PoE - Allows to view PoE status and power, Allows to enable/disable PoE power supply
• Security - Supports port isolation (only for the downlink ports), Supports locking login IP address, up to 64 addresses can be locked
• Maintenance
  • Supports N:1 port mirroring
  • Supports unified software configuration, management, and search
  • Supports discovering the connected video devices and generating a network topology on the software
  • Supports device upgrade, factory settings restoration, configuration import, configuration export, logs export, and device restart on the software

NSW3000-24T1GT1GC-LPOE-IN Specifications PDF