500759-RX Muxlab HDMI 2.0 over IP PoE Receiver

The Video Wall 4K over IP PoE Extender Kit allows HDMI equipment supporting up to 4K @ 30Hz or 1080p at 60Hz resolution to be connected and extended to create a Video Wall of user configurable size (X by Y) supporting 100's of screens, depending on network bandwidth, utilizing one Receiver for each display in the array. Each Transmitter (500759-TX) and Receiver (500759-RX) can be connected via Cat5e/6 cable up to 330ft (100m) from anEthernet Switch.

Specifications

• Environment - HDMI 1.4
• Devices - Blu-Ray, projectors, monitors, TV, PC, laptops, servers supporting HDMI
• Bandwidth - 300MHz
• Signals - HDMI 1.4 protocol
• Connectors
  • One (1) HDMI receptacle
  • One (1) RJ45S for Cat 5e/6 unshielded or shielded twisted pair
  • Two (2) 3.5mm jacks for IR emitter (on TX)/sensor (on RX)
  • Two (2) 3.5mm jacks for audio insert (on TX)/audio extract (on RX)
  • One (1) DB9 for the RS232
  • Four (4) DIP Switches for device ID addressing
• Maximum Distance (Based on a maximum length of 6.6ft (2m) of HDMI cable per end) - Cat5e/6 : 330ft (100m) up to 4K @ 30Hz
• Latency - Typical one (1) Frame (16ms), maximum 2 frames (33ms)
• Compression - Proprietary Compression
• Bandwidth - Up to 850Mbps
• Network Requirement - 1000BaseT with Jumbo Frame
• IR Frequency - 38 to 56KHz (IR Emitter and IR Sensor sold separately)
• RJ45 Pin Configuration (Reverse Polarity Sensitive. Use EIA/TIA 568A or 586B straight-through wiring)
  • RJ45 Link
  • Pin 1 (R)
  • Pin 2 (T)
  • Pin 3 (R)
  • Pin 4 (R)
  • Pin 5 (T)
  • Pin 6 (T)
  • Pin 7 (R)
  • Pin 8 (T)
• Cable - One (1) Cat 5e/6 or better twisted pair cables required
• Power Source - This device supports PoE (PD), an external power supply is not included. It is intended to be powered via a PoE (PSE) Ethernet Switch. If required, an optional power supply (500993) may be purchased separately
• PoE - IEEE 802.3af
• Power Consumption
  • Transmitter : 2.85 Watt
  • Receiver : 2.55 Watt
• Temperature
  • Operating : 0° to 40°C
  • Storage : -20° to 85°C
  • Humidity : Up to 95% non-condensing
• Dimensions - 4.40" x 5.08" x 1.00" (112mm x 129mm x 25mm)
• Weight - 1.5 lbs (0.68kg)
• Compliance
  • Regulatory : FCC, CE, RoHS
  • Flammability : 94V0
• Warranty - 3 years
• Order Information - 500759-RX Video Wall 4Kover IP PoE Extender RX (UPC: 627699807590)
• Accessories (These items are sold separately)
  • 500920 16-PortRackmount Transceiver Chassis
  • 500917 Wall Mount Transceiver Bracket Kit
  • 500990 IR Emitter, and 500991IR Sensor
  • 500993 Univ. Locking Power Supply 6A US/UK/EU Blade

500759-RX Specifications PDF

500759-RX Manual