500754-TX Muxlab HDMI over IP PoE Transmitter

The Video Wall over IP Extender Kit with PoE allows HDMI equipment to create a Video Wall of user configurable size (X by Y) supporting 100's of screens, depending on network bandwidth, utilizing one receiverfor each display in the array. The transmitterunit can be connected using a LAN switch (PoE or non-PoE), with maximum distances of 330ft (100m) of Cat 5e/6 cablebetween equipment. TheMuxLab ProDigital Network Controller (500811) is available to simplify configuration and controland allows for third party smartphone and tablet management

Specifications

• Environment - HDMI 1.3a
• Devices - DVD, plasma, projectors, monitors, TV, PC, laptops, servers supporting HDMI
• Video Wall - NxM video wall capabilities
• Max. configuration - 100's of transmitters and receivers, depending on network bandwidth
• Compatibility - Compatible to 500752 and 500753
• Transmission - Transparent to the user
• Video Bandwidth - 225MHz
• Signals - HDMI 1.3a protocol
• Connectors
  • One (1) HDMI receptacle
  • One (1) RJ45S for Cat 5e/6 unshielded or shielded twisted pair
  • One (1) 3.5mm jacks for IR emitter/sensor
  • One (1) DB9 Serial Port Connector
  • Four (4) DIP Switches for device ID addressing
• Maximum Distance(Based on a maximum length of 6.6ft (2m) of HDMI cable per end) - Cat5e/6 : 330ft (100m) up to 1080P
• Latency - One (1) Frame
• Compression - Motion JPEG
• Network Bandwidth - 60Mbps
• Network Requirement - 100BaseT for Point to Point; 1000BaseT for other configuration
• IR Frequency - 38to 56KHz
• Cable - One (1) Cat 5e/6 or better twisted pair cables required
• RJ45 Pin Configuration (Reverse Polarity Sensitive. UseEIA/TIA 568A or 586B straight-through wiring)
  • RJ45 Link
  • Pin 1 (R)
  • Pin 2 (T)
  • Pin 3 (R)
  • Pin 4 (R)
  • Pin 5 (T)
  • Pin 6 (T)
  • Pin 7 (R)
  • Pin 8 (T)
• Power Supply - This device supports PoE (PD), an external power supply is not included. It is intended to be powered via a PoE (PSE) Ethernet Switch. If required, an optional power supply (500992) may be purchased separately
• PoE - IEEE 802.3af
• Power Consumption
  • Transmitter : 2.9Watt
  • Receiver : 1.8 Watt
• Temperature
  • Operating : 0° to 40°C
  • Storage : -20° to 85°C
  • Humidity : Up to 95% non-condensing
• Enclosure - Metal black
• Dimensions - 4.40" x 3.00" x 1.00" (11.2 x 7.6 x 2.5cm)
• Weight - 1.1 lbs(0.5kg)
• Compliance
  • Regulatory : FCC, CE, RoHS
• Warranty - 2 years
• Order Information - 500754-TX Video Wall over IP Extender TXwith PoE(UPC: 627699907542)
• Network Controller - 500811 ProDigital Network Controller(supports Video Wall over IP)
• Accessories (These items are sold separately)
  • 500905 3-Port Rackmount Transceiver Chassis
  • 500920 Rackmount Transceiver Chassis 16-Port
  • 500917 Wall Mount Transceiver Bracket Kit
  • 500990 IR Emitter, and 500991 IR Sensor
  • 500992 Univ. Power Supply 5VDC/1.2A US/UK/EU Blade

500754-TX Specifications PDF

500754-TX Manual