VHW-HWPS-C2 Veracity HIGHWIRE Powerstar Duo Ethernet Over Coax Camera Unit Withintegrated 2-Port POE Switch

HIGHWIRE Powerstar Duo uses existing coax cabling as a reliable Ethernet network connection and is very easy to use and fast to install

Specifications

• Input connector - Detachable screw terminal
• Power input - POE OR 57V DC
• Power consumption - 3W - 8W depending on POE load

• IEEE 802.3af and IEEE 802.3at compliant

• Between 10W and 78W depending on power source (see table) managed across 4 ports. Max 25 watts per port (POE Plus)

• Connector type - BNC 75ohm
• Cable type - 75ohm coax cable (RG59, RG6, RG11 or similar)
• Range - Up to 300m on RG59, 350m on RG6, 500m on RG11, all at full rate
• Bandwidth - 200Mbps (total up + down)

• Connector type - RJ45 x 4, unmanaged 10/100 switch
• Rates - 10BASE-T or 100BASE-TX and full duplex, auto configuring
• Cable type - Straight through or cross-over Cat 5, Cat 5e or Cat 6 patch

• RJ45 Yellow - Network link and activity
• RJ45 Green - POE status (on/off)
• Coax Status - Coax link, Base network link, coax power (POE)
• POE Power - Power budget (in steps of 5W)

• Dimensions - L 132mm (inc. BNC) W 75mm H 22mm (W 94.6mm with wall mount lugs)
• Mounting - 4mm mounting holes on 86.1mm centres
• Weight - 179g [6.3oz] (183g with wall mount brackets) [6.4oz]
• Operating temperature - -10°C to 50°C [14°F to 122°F]
• Relative humidity - 85% non-condensing
• Compliance - CE, FCC, RoHS

• VHW-HWPS-C2 - HIGHWIRE Powerstar Duo Ethernet over coax camera unit withintegrated 2-port POE switch

VHW-HWPS-C2 Specifications PDF

VHW-HWPS-C2 Manual