1430106 Potter 1100-000 Protective Cage

Features

• Auto-Alignment – just steer the laser onto the Reflector, then at the flick of a switch, it aligns itself. 8 times faster than previous detectors
• One person installation – everything can be done by one person
• One standalone product – no specialist tools required; minimal prior knowledge and training needed

Description

With no specialist tools or knowledge needed for installation and operation, the Fireray One is a standalone beam smoke detector that prioritises ease of installation.

Using the Fireray One, it couldn’t be easier to bring the benefits of beam smoke detection to your application.

Technical Specifications

Detection performance

• Detection range - 16 to 164ft (5 to 50m), 16 to 394ft (5 to 120m) with Reflective Long Range Kit
• Alignment method - Laser assisted, Auto-Alignment. Manual alignment – optional setting
• Auto-Alignment protocol - Background check, Box search, Adjust and Center
• Building Movement Tracking - Compensates for natural shifts in alignment from building movement*
• Contamination Compensation - Compensates for gradual build-up of contamination on the optical surfaces
• Light Cancellation Technology - Compensates for high levels of sunlight and artificial lighting
• Optical wavelength – smoke detection - 850nm near infrared (invisible)
• Integrated laser – laser alignment - 650nm visible. Class 3R <5mW
• Dynamic Beam Phasing - Allows beam detectors to be mounted facing each other with the reflectors in the middle. Eliminates false alarms caused by crosstalk between beams
• Signal output - Individual Alarm and Fault relays (VFCO) 0.5A @ 30 VDC

Programmable user settings

• Alarm response threshold levels
  • 25% (1.25dB) – Fastest response to smoke
  • 35% (1.87dB) – Default value
  • 55% (3.46dB) – High immunity to false alarms, slow response to smoke
  • 85% (8.23dB) – Highest immunity to false alarms, slowest response to smoke
  • Configured via the integrated user interface
• Delay to Alarm - 10 seconds, for momentary partial obstruction of the beam path
• Delay to Fault - 10 seconds, for momentary obstruction of the beam path

User features

• Integrated user interface - Alignment mode switch, alignment directional buttons and configuration switches for alarm response threshold
• Alignment status indication - 2 Green LEDs and 1 Yellow LED
• System status indication - Normal operation – Green LED flashing every 10 seconds, Alarm condition – Red LED flashing every 5 seconds, Fault condition – Yellow LED flashing every 10 seconds for obscuration or every 5 seconds for contamination
• Cleaning - Flat front face with enclosed optics. Cleaning the optics does not affect alignment

Design parameters

• Separation distance between Detector and Reflector - 16 to 164ft (5 to 50m), 164 to 394ft (50 to 120m) with Reflective Long Range Kit
• Beam path clearance - 3.3ft (1m) in diameter from center line between Detector and Reflector
• Lateral spacing between detectors - 60ft (18.3m) maximum as per NFPA 72
• Detector location - Within the ceiling jet flow (top 10% of the floor to ceiling height) unless otherwise stipulated
• Detector dimensions - Width 5.12" x Height 7.13" x Depth 5.28" (W 130mm x H 181mm x D 134mm) (see diagram)
• Reflector dimensions - Up to 164.0ft (50m) separation distance – 3.94" x 3.94" x 0.36" (100mm x 100mm x 9mm), Up to 393.6ft (120m) separation distance - Four reflectors 7.88" x 7.88" x 0.36" (200mm x 200mm x 9mm) in square pattern
• Product weight - Detector – 1.55lbs (0.7 kg); Reflector – 0.22lbs (0.1 kg)
• Multi-detector arrangement - Dynamic Beam Phasing allows for Detectors to face each other with the reflectors in the middle
• Housing color - White RAL9016, UV stable

Electrical specifications

• Operating voltage - 14 to 36 VDC
• Operating current (constant) all operational modes - All operational modes – 5mA; Fast alignment mode – 33mA

Field wiring

• Cable gauge and type - 2 core, dedicated, 24 to 14 AWG (0.5 to 1.6mm) System compatible with fireproof and non-fireproof cable meeting local installation standards
• Cable entry - 3 knock-out locations capable of accepting M20, ½" or ¾" glands. 4 drill-out locations capable of accepting glands up to 0.82" (21mm) diameter

Test and maintenance

• Alarm test - Optical alarm test using Commissioning and Maintenance Kit accessory

Environmental specifications

• Operating temperature: - -4 to 131°F (-20 to +55°C)
• Storage temperature: - -40 to 185°F (-40 to +85°C)
• Relative humidity (non-condensing or icing): - 0 to 93%
• IP rating: - IP55
• Housing flammability rating: - UL94 V0 polycarbonate

Optical specifications

• Fault level / Rapid obscuration (∆ ≤ 2 seconds): - ≥85%
• Maximum angular alignment of Reflective Detector: - ±4.5° (±70° with adjustment bracket accessory)
• Maximum angular misalignment of Reflective Detector: - ±0.5°
• Maximum angular misalignment of Reflector: - ±5°

1430106 Specifications PDF