IL10-BP Pelco 1.92mm 30FPS @ 720p Indoor Box IP Security Camera 24VAC/POE

Specifications

CAMERA

• Imaging Device 1/6.9 inch
  
• Imager Type CMOS
  
• Imager Readout Progressive scan
  
• Aspect Ratio 16:9
  
• Sensitivity f/2.0
  
• Color (33 ms) 3.0 lux, autoswitching
  
• Color (200 ms) 0.5 lux, autoswitching
  
• Signal-to-Noise Ratio 50 dB
  
• White Balance Range 2850° to 6500°K
  
• Video Motion Detection 3 zones, plus background zone
  
• Lens f/2.0
  
• Focal Length 1.92 mm

CONSTRUCTION

• Camera Body Polycarbonate-ABS blend
  
• Bubble Polycarbonate, clear

ELECTRICAL

• Input Power
  
• 24 VAC 24 VAC ±10% nominal;
  
• 50/60 Hz nominal
  
• PoE IEEE802.3af, ±10%, Class 0
  
• Network Port RJ-45 connector
  
• Cabling Type Cat5
  
• Power Consumption <3 W

ENVIRONMENTAL

• Operating Temperature –0° to 40°C (32° to 104°F)
  
• Storage Temperature –0° to 60°C (32° to 140°F)
  
• Operating Humidity 15% to 85%, RH (noncondensing)
  
• Storage Humidity 15% to 85%, RH (noncondensing)

CERTIFICATIONS/PATENTS

• CE, Class A
  
• FCC, Class A
  
• UL/cUL Listed
  
• KCC
  
• Patents are pending

VIDEO

• Video Encoding H.264
  
• Video Streams Up to 2 simultaneous streams: 1 view and 1 record;
  
• 1280 x 720 at 30, 25, 15, or 10 ips; plus 640 x 352 at 5 ips
  
• Frame Rate Up to 30 ips
  
• Maximum Resolution 1280 x 720
  
• Supported Protocols HTTP, RTP, RTSP, NTP, IPv4, RTCP, UPnP, SSH, SSL
  
• Unicast Users Up to 6 simultaneous users depending on resolution settings (2 guaranteed streams);
  
• 4 users for full resolution at 30 ips
  
• Multicast Users Unlimited users
  
• Software Interface Web browser view and setup
  
• Pelco System Integration Endura 2.0 (or later);
  
• Digital Sentry 7.3 (or later);
  
• DX4700/DX4800
  
• Open API Pelco API v1.0 or ONVIF Profile S

PHYSICAL

• Weight: Box - 0.162 kg (0.357 lb) Shipping - 0.356 kg (0.785 lb)
  

IL10-BP Spec Sheet