KIT/201S/372S/NSW2020-Z Uniview Video Doorbells

Specifications

• Model - KIT/201S/372S/NSW2020
• Kit dimensions (L×W×H) - 268mmx213mmx180mm
• Kit weight - 2.005kg

Model - OEU-201S-HMK-W

• Power supply - DC12V ±25% PoE Power supply
• Card capacity - 10000
• Operating system - Linux
• Illuminator - IR light (adaptive)
• WDR - Support
• FOV - Horizontal: 124.3°, Vertical: 67.5°, Diagonal: 147.2°
• Power consumption - < 10W
• Volume adjustment - Support
• Audio quality - Noise reduction, echo cancellation, auto gain control
• Audio input - built-in mic
• Audio output - 1 Built-in speaker
• Protocol - UNV private protocol
• Audio compression standard - PCM,G711,MP3
• Audio compression bitrate - 128Kbps
• Button - Call button
• Ingress protection - IP65 (Apply waterproof glue to the gap between the device and the wall. See the corresponding quick guide for details.) IK08
• Weight - 0.267kg
• Mount method - Wall mount, flush mount
• Interface - Power supply*1, network interface*1, RS485*1, door lock interface*2, IO input*4
• Communication mode - 100Mbps network interface, supports IEEE802.3af; Wi-Fi
• Dimensions (L×H×W) - 79mmx171mmx34mm
• Operating environment - - 30°C to 60°C, 10% to 90% RH noncondensing, outdoor

Model - OEI-372S-H-W

• Power supply - DC12V ±25%, PoE power supply
• Screen resolution - 1024 x 600
• Display screen - 7-inch ultra-thin TFT LCD touch screen
• Operating system - Linux
• Audio quality - Noise reduction, echo cancellation, auto gain control
• Audio input - Built-in mic
• Audio output - Built-in speaker
• Audio compression format - MP3, G711
• Audio compression bit rate - 128kbps
• Protocol - Uniview private protocol
• TF card - 1 x 32G TF card, capable of storing 100 live video snapshots, 200 call records and call snapshots
• Power consumption - < 10W
• Weight - 0.377kg
• Interface - Power supply*1, network interface*1, RS485*1, IO output*2, IO input*8, TF card slot*1
• Communication mode - 100Mbps network interface, supports IEEE802.3af; Wi-Fi
• Dimensions (L×H×W) - 193.2mmx143.4mmx25mm
• Operating environment - - 10°C to 55°C, 10% to 90% RH noncondensing, indoor

Model- NSW2020-6T-POE-IN

• Service port - 6 x 100M copper port (RJ45), including 4 x 100M copper port (supports PoE power supply)
• Standards - IEEE802.3, IEEE802.3u, IEEE802.3az, IEEE802.3x, IEEE802.3af, IEEE802.3at
• Switching capacity - 1.2Gbps
• Packet forwarding rate - 0.90Mpps
• Packet buffer - 448kbit
• MAC - 1K
• Dimensions (W×D×H) - 107x99x25mm
• Weight - 0.19kg
• Power - DC 48V/51V
• PoE - Supports IEEE802.3af and IEEE802.3at
• PoE power supply mode - Mode B, 4/5+, 7/8-
• PoE power - Maximum total power: 60W, Maximum PoE power for single port: 30W
• Priority port - 1 to 2
• Mount method - Desktop mount, wall mount
• Fan - Fanless
• Operating temperature - 0°C to 40°C
• Operating humidity - 10% to 90% RH, noncondensing
• Storage temperature - -40°C to 70°C
• Storage humidity - 5% to 90% RH, noncondensing
• Indicator
  • POWER: - Steady on: Normal power input, Off: Abnormal power input No PoE port indicator
  • PoE-MAX: - Off: The total PoE power is less than 80% of the total power of the device. Steady on: The total PoE power is higher than 85% of the total power of the device
  • Link/Act: - Off: The port is disconnected. Steady on: The port is connected. Blinking: The port is transmitting data.
• DIP switch - Default: All ports can communicate with each other. Extend: All PoE ports can only communicate with uplink ports, and the network transmission distance can reach up to 250 meters.

KIT/201S/372S/NSW2020-Z Specifications PDF